diff --git a/README.md b/README.md
index 59319a6..2558601 100644
--- a/README.md
+++ b/README.md
@@ -1,2 +1,36 @@
-# RCEU1205-ATX-to-Amiga-Power
+# RCEU1205
  ATX to Amiga Power adapter for A500/600/1200 Tower
+ 
+Make note that the pcb has not been testet yet, and shouldn't be considered a release just yet. 
+
+# BOM
+
+w/everything (*)
+1x 24 pin ATX connector
+5x Pins salvaged from a DIN connector
+2x 4pin SIL header
+7x 2pin SIL header
+
+bare minimum (*)
+1x 24 pin ATX connector
+5x Pins salvaged from a DIN connector
+1x 2pin SIL header
+
+
+# Putting it all together
+The pins from the DIN connector is soldered into the square din holes.
+
+
+# Description
+J2 is the power connector for the ATX power supply.
+
+There are 2x 4pins headers for 12v psu's  pin1 = gnd, pin2 = 12v, pin3 = sense, pin4 = control
+The 2x 2pins headers to the right gains access to pin 3 and 4 accordingly to the 12v pin header, in case you want to control the 12v fans using an arduino or similar.
+
+There are 2x 2pins headers for 5v
+And there are 2x 2pins headers for 3.3v
+You can use these for whatever you want.
+
+(*) the extra pin headers are not needed, but can be an extra help if you want to i.e. control fans using an arduino and temperature sensor.
+
+![Pics/RCEU1205.jpg](Rendered Pic)