# 1541-Parallel_Adapter This is an adapter to easier add a parallel port for the Commodore 1541 and 1541-II diskette drive. You can (and should) read more on Peter's site https://ist.uwaterloo.ca/~schepers/1541par.html Item list. * 15CM 10 wire flatcable. * or 8 wire flatcable for ZoomFloppy. * 15pin D-sub female(not the VGA type), either solder or for IDC ribbon cable (last one recommended). * 40 pins IC socket. * 2 x 20 pins sil header male-male. (turned/tulip recommended). All items can be found on eBay or your favorite electronics pusher. Pin 1 from the PCB connects to Pin 1 of the D-sub connector, 2 to 2 etc. **Let the PCB be as thin as possible, otherwise you need thicker washers. Testet is a 0.8mm thick adapter. ** Washers is needed for the 1541-II drive to lift the mechanical parts. 1.6mm (2 x 0.8mm) height with an inner diameter of 4mm is sufficient to lift the drive. Connecting the adapter to ZoomFloppy For solder pins ![SolderPins](/Pics/forDoc/15Female.jpg) Adapter | 15pin D-sub female ------------ | ------------- Pin 1 | Pin 1 Pin 2 | Pin 2 Pin 3 | Pin 3 Pin 4 | Pin 4 Pin 5 | Pin 5 Pin 6 | Pin 6 Pin 7 | Pin 7 Pin 8 | Pin 8 Soldering the cable for this is just the same pinout 15pin D-sub male | 15pin D-sub female ------------ | ------------- Pin 1 | Pin 1 Pin 2 | Pin 2 Pin 3 | Pin 3 Pin 4 | Pin 4 Pin 5 | Pin 5 Pin 6 | Pin 6 Pin 7 | Pin 7 Pin 8 | Pin 8 If you choose to use the connector to press the IDC connector and don't want to use a 15 pin cable wasting 7 wires, you can hook it up like this ![SolderPins](/Pics/forDoc/15FemaleIDC.jpg) Adapter | 15pin D-sub female (IDC) ------------ | ------------- Pin 1 | Pin 1 Pin 2 | Pin 9 Pin 3 | Pin 2 Pin 4 | Pin 10 Pin 5 | Pin 3 Pin 6 | Pin 11 Pin 7 | Pin 4 Pin 8 | Pin 12 The cable should be soldered accordingly 15pin D-sub female | 15pin D-sub male ------------ | ------------- Pin 1 | Pin 1 Pin 2 | Pin 9 Pin 3 | Pin 2 Pin 4 | Pin 10 Pin 5 | Pin 3 Pin 6 | Pin 11 Pin 7 | Pin 4 Pin 8 | Pin 12 Many thanks to [Peter Schepers](https://ist.uwaterloo.ca/~schepers/1541par.html).