.. | ||
datasheet | ||
68HC05.dcm | ||
68HC05.lib | ||
aimtec.dcm | ||
aimtec.lib | ||
BLK-MD-SPK-B.dcm | ||
BLK-MD-SPK-B.lib | ||
bluepill_breakouts.dcm | ||
bluepill_breakouts.lib | ||
BM2x.dcm | ||
BM2x.lib | ||
china_bluepill.dcm | ||
china_bluepill.lib | ||
F-3188_CSR8645.dcm | ||
F-3188_CSR8645.lib | ||
F-6188.dcm | ||
F-6188.lib | ||
F-6888.dcm | ||
F-6888.lib | ||
jacks.dcm | ||
jacks.lib | ||
LM2594.dcm | ||
LM2594.lib | ||
MAX809_810.dcm | ||
MAX809_810.lib | ||
MB-CM15113.dcm | ||
MB-CM15113.lib | ||
MC33660.dcm | ||
MC33660.lib | ||
MCU_Microchip_ATMEGA.dcm | ||
MCU_Microchip_ATMEGA.lib | ||
README.md | ||
S3860M-S.dcm | ||
S3860M-S.lib | ||
SOYO-BT24G03.dcm | ||
SOYO-BT24G03.lib | ||
xs3868.dcm | ||
xs3868.lib |
OVC3860 BLK-MD-SPK-B XS3886 S3860M-s module setup:
-
use windows, or wine with symbolic link ~/.wine/dosdevices/com1 -> /dev/ttyUSBx
-
disable your HW COM1
-
set usb to serial dongle to be COM1
-
connect module to usb-serial dongle, BT module reset pin connected to GND
-
start datasheet/OVC3860_revd_config_tool.exe
-
disconnect reset pin on bluetooth module from ground, config tool should be connected now, pres read all
-
change value, then write changes with write all or selected
-
info about PSKey in datasheet/OVC3860_RevE_PSKeys_Setting_v1.2.pdf
-
baudrate: uart_baudrate
-
device name: localname
-
disable all sounds from BT module (poweron/off, connected etc.): set all tone_conf[x].cnt=00
breadboard adapters for these adapters can be purchase at tindie:
BLK-MD-SPK-B https://www.tindie.com/products/tomaskovacik/breadboard-adapter-for-blk-md-spk-b/
XS3886 / S3860M-s https://www.tindie.com/products/tomaskovacik/breadboard-adapter-for-s3860m-s-sx3868/
SOYO-BT24G03 https://www.tindie.com/products/tomaskovacik/breadboard-adapter-for-soyo-bt24g03-bt-module/
F-3188 https://www.tindie.com/products/tomaskovacik/breadboard-adapter-for-f-3188-csr8645-module/