ATX to Amiga Power adapter for A500/600/1200 Tower
Go to file
2020-08-23 17:34:43 +02:00
Gerber Initial public release 2020-08-23 17:34:43 +02:00
Pics Create RCEU1205.jpg 2020-04-06 18:51:51 +02:00
Schematics/KiCAD Initial public release 2020-08-23 17:34:43 +02:00
.gitattributes Initial commit 2020-04-06 18:35:58 +02:00
.gitignore Initial commit 2020-04-06 18:40:33 +02:00
LICENSE Initial commit 2020-04-06 18:35:58 +02:00
README.md Update README.md 2020-04-06 18:53:39 +02:00

RCEU1205

ATX to Amiga Power adapter for A500/600/1200 Tower

Make note that the pcb has not been testet yet, and shouldn't be considered a release just yet.

BOM

w/everything (*) 1x 24 pin ATX connector 5x Pins salvaged from a DIN connector 2x 4pin SIL header 7x 2pin SIL header

bare minimum (*) 1x 24 pin ATX connector 5x Pins salvaged from a DIN connector 1x 2pin SIL header

Putting it all together

The pins from the DIN connector is soldered into the square din holes.

Description

J2 is the power connector for the ATX power supply.

There are 2x 4pins headers for 12v psu's pin1 = gnd, pin2 = 12v, pin3 = sense, pin4 = control The 2x 2pins headers to the right gains access to pin 3 and 4 accordingly to the 12v pin header, in case you want to control the 12v fans using an arduino or similar.

There are 2x 2pins headers for 5v And there are 2x 2pins headers for 3.3v You can use these for whatever you want.

(*) the extra pin headers are not needed, but can be an extra help if you want to i.e. control fans using an arduino and temperature sensor.

Rendered Pic