37 lines
1.1 KiB
Markdown
37 lines
1.1 KiB
Markdown
# RCEU1205
|
|
ATX to Amiga Power adapter for A500/600/1200 Tower
|
|
|
|
Make note that the pcb has not been testet yet, and shouldn't be considered a release just yet.
|
|
|
|
# BOM
|
|
|
|
w/everything (*)
|
|
1x 24 pin ATX connector
|
|
5x Pins salvaged from a DIN connector
|
|
2x 4pin SIL header
|
|
7x 2pin SIL header
|
|
|
|
bare minimum (*)
|
|
1x 24 pin ATX connector
|
|
5x Pins salvaged from a DIN connector
|
|
1x 2pin SIL header
|
|
|
|
|
|
# Putting it all together
|
|
The pins from the DIN connector is soldered into the square din holes.
|
|
|
|
|
|
# Description
|
|
J2 is the power connector for the ATX power supply.
|
|
|
|
There are 2x 4pins headers for 12v psu's pin1 = gnd, pin2 = 12v, pin3 = sense, pin4 = control
|
|
The 2x 2pins headers to the right gains access to pin 3 and 4 accordingly to the 12v pin header, in case you want to control the 12v fans using an arduino or similar.
|
|
|
|
There are 2x 2pins headers for 5v
|
|
And there are 2x 2pins headers for 3.3v
|
|
You can use these for whatever you want.
|
|
|
|
(*) the extra pin headers are not needed, but can be an extra help if you want to i.e. control fans using an arduino and temperature sensor.
|
|
|
|
|