39 lines
1.4 KiB
Markdown
39 lines
1.4 KiB
Markdown
# FlashFloppy-OSD-Adapter
|
|
Adapter which should make it a little easier to handle the bluepill for regular GOTEK drives for the Amiga
|
|
|
|
# What is it?
|
|
It's just a basic adapter which draws out the pins needed to connect the bluepill with the Amiga and GOTEK drive.
|
|
You can also program the Bluepill using this adapter.
|
|
|
|
# How to use
|
|
Download the gerber (zip) file and upload it to your favorite PCB manufacturer. I'm using jlcpcb.com.
|
|
|
|
Check out this image and use the link below for reference
|
|
|
|
|
|
Go to https://github.com/keirf/FF_OSD
|
|
|
|
You decide if you want to use sil headers or just solder wires to the holes.
|
|
If you have a 3D Printet drive bay, you can attach the Adapter with Bluepill to here.
|
|
|
|
# Do I really need this?
|
|
No, you can use the Bluepill without this adapter.
|
|
|
|
# More?
|
|
You can isolate the bottom, with i.e. cardboard/hotglue, or isolation tape, to prevent accidently shorts.
|
|
|
|
# Placements
|
|
The resistor values are printet on the silkscreen, which isn't visible on the picture above.
|
|
|
|
|
|
# Parts list
|
|
2 x 4,7k Ohm throughhole resistor
|
|
|
|
1 x 270 Ohm throughhole resistor
|
|
|
|
2 x 1x4 pin SIL header male - you can ommit these if you want to solder wires directly and program before installing
|
|
|
|
2 x 1x2 pin SIL header male - you can ommit these if you want to solder wires directly
|
|
|
|
|