28 lines
1.2 KiB
Markdown
28 lines
1.2 KiB
Markdown
# RCEU530-reArcade
|
|
new Arcade PCB with autofire
|
|
|
|
reArcade is an all microswitch drop-in replacement PCB for the Arcade joystick.
|
|
Added is the possibility of an autofire using a 555 timer.
|
|
Microswtich in firebutton - in case you don't want to modify the original pcb.
|
|
|
|
In order to use autofire, a new cable is required which supplies 5v.
|
|
|
|
The long arm microswitch needs to be bent 90deg, 1.5cm from where it enters the house, then +1.1cm from there approx 105deg. You may need to test it by trial-and-error.
|
|
|
|
|
|
|
|
# BOM
|
|
4x Microswitches with regular size arm [eBay](https://www.ebay.com/itm/10-X-KW4-3Z-3-Hinge-Roller-Lever-SPDT-Momentary-Micro-Limit-Switch-3D-printer/122688679006).
|
|
1x Microswitch with long arm [eBay](https://www.ebay.com/itm/5Pcs-AC250-125V-5A-3P-Momentary-36mm-Lever-Arm-Micro-Switch-Green-KW12-9S/233272820914).
|
|
1x 1x7 pin male pinheader.
|
|
|
|
**Optional Autofire**
|
|
1x on/off switch
|
|
1x SMD 0805 Resistor 33k
|
|
1x SMD 0805 Resistor 4k7
|
|
2x SMD 0805 Capacitor 10nF
|
|
1x SMD 555 timer
|
|
1x Joystick cable with 5v (min 7 wire cable, DB9 female, 1x7 pin female connector 2.54mm - or just get a finished extension cable on ebay).
|
|
|
|
|