A Parallel adapter for the C= 1541(-II) diskettedrive

Go to file

tomse 939b482512 Update README.md		2019-01-18 19:20:32 +01:00
Hardware/Eagle	Initial release	2019-01-18 17:02:45 +01:00
Pics	Initial release	2019-01-18 17:02:45 +01:00
.gitattributes	Initial commit	2019-01-18 15:58:46 +01:00
LICENSE	Initial commit	2019-01-18 15:58:46 +01:00
README.md	Update README.md	2019-01-18 19:20:32 +01:00

README.md

1541-Parallel_Adapter

(This is still untestet, but should work) This is an adapter to easier add a parallel port for the Commodore 1541 and 1541-II diskette drive.

Item list.

15CM 10 wire flatcable.
15pin D-sub female(not the VGA type), either solder or for IDC ribbon cable (last one recommended).
40 pins IC socket.
2 x 20 pins sil header male-male. (turned/tulip recommended).

All items can be found on eBay or your favorite electronics pusher.

Pin 1 from the PCB connects to Pin 1 of the D-sub connector, 2 to 2 etc.

Let the PCB be as thin as possible. Testet is a 0.8mm thick adapter.

Washers is needed for the 1541-II drive to lift the mechanical parts. 1.6mm (2 x 0.8mm) height with an inner diameter of 4mm is sufficient to lift the drive.

Many thanks to Peter Schepers.